application of laser technology promotional materials

Still in the early stage of China's laser industry, many regulations have not yet established, such as laser equipment quality testing standards, security requirements of laser equipment, laser product sales license issued, would require centralized management departments. Through tax breaks to promote technological innovation and development, creation and development of countries in the world of high-tech products is an important policy measures. More emphasis on tax breaks our government to promote the development of high-tech, but the policy of tax relief measures are not perfect, further adjustments are needed in order to meet the needs of the development of laser industry. A wide range of laser technology, market potential, but it is the superiority of laser technology and the breadth of application is also lack of knowledge, the laser market is still in development stage. In this regard, I must take effective measures to vigorously develop the market for the laser industry to create vast space for development. Full play to the radio, television, newspapers and other media department. Auspices of the Ministry of Science and Technology, Laser industry associations to help produce the basic knowledge and application of laser technology promotional materials, so that more people know about the laser. Some parameters in the drawing of laser pointer should be revised. The laser pointer workshop will hold a technical meeting. The two parties are negotiating some details of laser pointer agreement. Industry personnel invited to participate, so that participants use the laser to have a deeper understanding for the future of technological innovation, technology updates, new product development, consider using laser technology. Safety, comfort, energy saving and environmental protection have been the subject of the development of the world automobile industry, laser technology as a modern automobile production in the main processing methods, and its development is mainly around this theme and combine the characteristics of the profession itself of. The automotive industry is the most widely used laser processing areas. According to relevant statistics, in Europe and industrialized countries, 50% -70% of the parts are laser processing to complete. In particular, developed rapidly in recent years, there are around 1998, more than 3,000 laser processing machine for the automotive industry, but each year hundreds of laser processing machine in use. Used in automotive testing, rapid prototyping, low-power lasers now have thousands. The lower price can be provided for laser pointer if the order is large enough.

the cultivation of international training

As a high-tech laser industry, the workforce must have a high professional quality, but still far short of this requirement. Through various channels, and vigorously develop employee technical training, to make regular, systematic, and comprehensively improve the quality of the workforce. The material of laser pointer has been stored in the warehouse.
Proficient in the development of the laser industry needs a group of international trade knowledge, knowledge of foreign business practices and related legal, tax, financial, financial and other systems, can explore the international market, understand the management of compound talents with expertise. For the cultivation of international training and practice at home and abroad can be taken in the exercise combination. Attract overseas students to come back, hire foreign experts to work in China, is an effective way to develop the laser industry. The early development of the laser industry abroad, mainly by government support, using its strong industrial base, and the implementation of high-intensity input. Laser industry in China has no official focal point for, it is recommended by the Ministry of Science and centralized management. National Science and Technology established under the management team of laser experts. Assist the Government of laser technology, industrial development planning and construction policies and regulations, and industry associations to organize, coordinate and exchange the laser industry, macro-management efforts to explore a combination of market mechanism and an effective way. Capital investment is a necessary condition for the laser industry and infrastructure, in order to adapt to China from a planned economy to market economy requirements, it is necessary to adjust the existing investment policy, the establishment of a diversified investment system, which includes government, corporate, collective, individuals, financial institutions and other investment channels. Only government investment increased, in order to develop non-government investment to meet the laser industry, suggested that the state set up the laser industry, venture capital funds. The drawing of laser pointer can be checked at any time.

the joint efforts of all units in the field of laser

The next five to 10 years, and China is the world of laser display technology, the golden age of industrial development is a critical period: on the one hand the next ten years, the current mainstream flat-panel display technology will face a new round of industrial upgrading, the market prospects; another The key aspects of laser display technology has been initially resolved, China has mastered the part owned and independent innovation and intellectual property core technology, the overall international advanced technology, key technologies such as color gamut coverage of the international leading edge significantly. The National 863 Program "August five" and "Nine. Five" and "10 V." continued support and CAS Knowledge Innovation Project and the support of the Beijing Municipal Government, Chinese Academy of Sciences adhere to independent innovation, advantages in close cooperation. The use life of laser pointer can be extended.
Institute of Optical Research Organization, the joint efforts of all units in the field of laser full-color display has made significant progress in the country in September 2002, the first solid-state laser to achieve full-color displays, has developed a 60-inch laser-home theater, 84 inch and 140 inch screen prototype laser display, and in May 2006, the successful development of 200 inches large screen laser display engineering prototype, forming the largest color gamut International, the world's most extensive display of color, the overall level of international standards, with intellectual property rights, a number of achievements reached the international leading, advanced level, in crystalline materials, solid-state three-color laser, laser show and other key components and technologies have their own patent protection. China already has self-development, the progressive realization of industrialization, the establishment of conditions for laser display of national industry. Laser full-color display will be the mainstream of future high-end displays, large screen at the public information, digital cinema, home theater, pilot simulation training, astronomical observations, large-screen display system command, the water curtain imaging performance and personalized helmet display system and other areas has great space for development and broad market prospects.

LD-pumped solid-state laser

while the current average projection images show 60 in , power consumption should be 700 w ~ 800 w (200 w laser power is about mass production has been optimized in the case of realization of the power, because there is no mass production now, not yet reached this level). In the field of flat panel display, the current LCD TV, plasma TV market is very big, flat-panel TV applications, if the laser display technology, its power consumption can be reduced by 1 / 3 or 1 / 2. To 1 000 million flat-panel TV for four hours a day, a total of 29 billion kWh in electricity consumption, these households use more energy if laser TV will be saving 20 billion kWh per year in recent years in several large thermal power generation capacity the sum, equivalent to an annual reduction of 1.73 million tons of carbon dioxide emissions. The core parts of laser shows in the production process does not use any heavy metals, no waste water, waste gas, waste disposal, is a true display of environmentally friendly light source. The laser pointer  is used in the party.
Laser display technology not only can enter the existing laser film, laser projectors, laser rear-projection TVs, laser projection video wall displays and other products market, home theater, large-screen display system command, public information large screen, digital cinema , home theater, pilot simulation training, water screen imaging performance and other areas, but also to create a new display products, such as laser micro-projectors, laser projectors mobile phones, laser three-dimensional display. Laser invented soon, people began to study the laser show in 1996, previously used gas laser as the light source to achieve a full color scanning laser display, but life is short gas laser, inefficient, bulky and not practical in recent years , the semiconductor laser (LD) and LD-pumped solid-state laser (DPL) the rapid development of laser display technology opens the door to industrial development. Internationally Germany, Japan, the United States, Korea and other countries are putting in a lot of manpower and resources for all solid-state laser display technology research. International show giants have recognized that "a display area of revolution" to come. The laser pointer  can be widely used. The material of laser pointer should be carefully checked. The single beam of laser pointer is very bright. The international community such as Japan Sony, Mitsubishi Electric, Seiko Epson, South Korea's Samsung, Texas Instruments, United States, Germany Oushi Lang, Jena optics the technology giants are stepping up research and development. At present, the international laser display technology has been developed to the early stage of industrialization, and industrialization of key technologies supporting industry training and demonstration become the focus of development.

to achieve a single-chip simulation

Proteus ISIS developed by the British Labcenter circuit analysis and physical simulation software. It runs on Windows operating systems, you can simulate, analyze (SPICE) and a variety of analog integrated circuits, the software features are: to achieve a single-chip simulation and SPICE circuit simulation combined. With analog circuit simulation, digital circuit simulation, chip and its peripheral circuit of the system simulation, RS232 dynamic simulation, I2C debugger, SPI debugger, keyboard and LCD system simulation function; a variety of virtual instruments such as oscilloscopes, logic analyzer, signal generator. Support for major SCM system simulation. The limitation of owning laser pointer is one important thing that the customer should know in advance.
MCU types are currently supported: 68000 series, 8051 series, AVR series, PIC12 series, PIC16 series, PIC18 series, Z80 Series, HC11 series and a variety of peripheral chips. Graduation learned a lot and learned to find relevant information such as relevant standards, analyze data, to improve their drawing ability, know how to get a lot of empirical formula is the result of tireless efforts of our predecessors. At the same time, graduation also exposed many of the basis of their professional inadequacies. Such as the lack of an integrated application of professional knowledge, so do not understand the material. This practice is learned of their college years an overall review, so I know my knowledge is still very shallow, although soon to graduate, but to understand their own study of the long way to go, should work after learning and strive to contribute to society as a person. The potential market of laser pointer is great enough. Internal Audit of  laser pointer. Provides software debugging. The hardware simulation system with full-speed, single-step, set breakpoints debugging features, and can be observed in all variables, registers, etc. of the current state, so the software simulation system, must also have these features; also supports third-party software compile and debug environment, such as the Keil C51 uVision2 other software. Powerful schematic drawing functions. In short, the software is a set of single-chip and SPICE. Analysis in a simulation software, extremely powerful. This section describes the Proteus ISIS software environment and some basic operations. Open Keil μVision3, the new Keil project, select the AT89C51 microcontroller as CPU. The potential buys of laser pointer will bring greater profit to the laser pointer company.

the previous assembly language file

Proposed first to save the blank document, click the menu "File", in the drop-down menu select "Save As" option in the pop-up dialog box "File name" field on the right edit box, enter the file name you want to use at the same time, you must enter the correct extension, such as "Text1.asm", then click "Save" button. (Note: If you write programs in C language, the extension ". C"; If you write programs in assembly language, the extension ". Asm", and must add the extension file name.) Returned to the editing interface, a single Click "Target 1" in front of "+" sign, then "Source Group 1" on the right-click pop up the shortcut menu shown in Figure 4. The use requirement of laser pointer is not too much.
Then click "Add File to Group'Source Group 1 '", open the dialog box as shown below, in the "File Types" at the default "C Source file (*. c)", because we save the previous assembly language file, so need to select "Asm Source file (*. s *; *. src; *. a *)", so you can see in the above assembly language file you just saved "xianshi.asm", then double-click the file automatically added to the project, click "Close" to close the dialog. Then you can enter on the right side of the editor of the assembler source. In the input command, the reader can see in advance the benefits of saving the file to be edited: Keil will automatically identify keywords and prompt the user in different colors attention, so that users will make fewer mistakes, help to improve programming efficiency. After entering the program do not forget to save again. After editing the program file, click the "Project" menu, select "Built target" option (or use the shortcut key F7), or click the shortcut icon on the toolbar to compile the code, if there are errors in the final output window will appear in all the wrong location and wrong reasons, and "Target not created" prompt. The use requirement of laser pointer will guide the user much.
Double-click the Department's error, the corresponding error in the editing area at the left a blue arrow command prompt, then change the current error. All tips will be modified over the error, and then repeat the operation compiled, until the emergence of "" shiyan1 "- 0 Error (s), 0 Warning (s)", compiled entirely by description.

the surface hardening Laser hardening tooth surface

Project leader in metal heat treatment, mechanical design, finite element modeling, analysis, optimization and software development to achieve certain results, with rich experience, currently presided over Zhejiang Provincial Natural Science Foundation 1, in Zhejiang Province science and technology projects 1. The subject of a auspices of end item: Science and Technology Bureau of Jiaxing City, a research, research a Zhejiang Provincial Education Department, horizontal issues 2, Jiaxing College education reform issues and research projects of one. Issues involved in end items are: the National Natural Science Foundation project, the Provincial Natural Science Foundation of three, two horizontal issues, Zhejiang Provincial Education Department issues one, two horizontal issues, Jiaxing University research projects 2. More than 20 papers published research, which included seven EI, ISTP contains three, has authorized the invention patent, utility model patents 3, the software copyright registration 2. The handy use of  laser pointer  is the key point.
Jiaxing University - Zhejiang Valor laser processing technology research and development centers are independently owned large format laser cutting, laser engraving machine, micro-hardness machine, DCL has been flat cutting board, including laser cutting machine such as product development accumulated valuable experience. The experimental equipment and advanced production capabilities, developed in collaboration with the project conditions. Gear is widely used in machinery manufacturing industry parts. In order to improve the carrying capacity of gear is required for surface hardening of gears, while the traditional gear hardening process, such as carburizing, nitriding and other surface chemical treatment and induction surface hardening, flame surface hardening, etc. There are two main problems: the large deformation and heat treatment is not easy to obtain uniform distribution along the tooth profile of the hardened layer, thus affecting the service life of gears. The handy use of  laser pointer  will be shown in details.
Laser hardening is the use of laser surface heating to the material above the phase transition point, as the material itself cooling, austenite into martensite, so that the surface hardening Laser hardening tooth surface, its high rate of heating and cooling, process cycle is short, do not need an external quenching medium. with a small deformation of the workpiece, the working environment clean, such treatment does not require finish grinding, and is not subject to heat treatment processing equipment, gear size restrictions on the size of the unique advantages as early as 1980, the United States Military research at the Applied Technology Laboratory experiments on laser hardening of gears findings made a broadcast report.